2. Type of surface: Acrylic Plastic, Asphalt, Cork, Linoleum, Plexiglas, Polyurethane, Vinyl Clothing, Vinyl Tile, Vinyl Wall Covering
Scrape up any excess polish, immediately. Using a cloth dipped in amyl acetate, dab the area, then rinse. This stain may be permanent because fingernail polish contains chemicals that can ruin the surface very quickly.

3. Type of surface: Alabaster, Marble
Immediately wipe up the excess polish, if any. Wipe the area using a cloth dampened with acetone. With a damp cloth, rinse and wipe dry. If any of the stain is still present, try using a poultice of water, 3% hydrogen peroxide, and a mild powder detergent. Apply to the stain and then cover with a damp cloth. When the stain is no longer present, rinse thoroughly and dry.

4. Type of surface: Bamboo, Cane
Remove any excess. Using a cloth dipped in mild pure soapsuds, along with a small amount of ammonia, wipe the area clean. Dip the edge of a clean cloth in acetone, if any of the stain remains. Be careful not to force the stain into the plant fibers. Dab gently at the stain. This stain could be permanent if not treated immediately.

5. Type of surface: Carpet/Synthetic, Carpet/Wool
Without forcing it into the fibers, scrape as much of the excess polish as you can. Apply amyl acetate to the stain and using an absorbent pad dampened with amyl acetate, cover the stain. Keep the area moist and let stand for approximately fifteen minutes, blotting occasionally. You may want to scrape to help loosen the stain. Carefully flush with a dry-cleaning solvent. Allow the area to thoroughly dry.

6. Type of surface: Ceramic, Glass/Tile, Enamel, Glass, Porcelain, Silver
Immediately wipe up any excess polish. Wash the surface using a cloth dipped in a solution of washing soda, water, and a few drops of ammonia. Rinse thoroughly and wipe dry. Fingernail polish that has hardened on ceramic tile, enamel, or glass can sometimes be gently scraped away with a razor blade.

7. Type of surface: Grout
Blot up as much of the nail polish as possible with a sponge. Dip a wet toothbrush into a small amount of powdered cleanser and gently scrub. Rinse thoroughly with clear water and wipe dry.

8. Type of surface: Paint/Flat, Paint/Gloss
Being careful not to spread the polish, wipe away any of the excess. Using a cloth dipped in 1/3 quart warm sudsy water that has had one teaspoon borax added to it, wipe the stain gently. Rinse well with clear water and let dry thoroughly.

9. Type of surface: Aluminum, Iron, Stainless Steel, Tin
Immediately wipe the excess polish. There should not be a stain on this type of surface, only a mild discoloration. This is because these surfaces are not porous. To remove any discoloration, wash surface using a steel wool soap pad. Rinse well and let dry.

It is best to first test any stain removal method on an inconspicuous area to avoid any undesirable results.